Hello, I have a 1, sq. I bought my own modem, the Arris SB I have an Airport Extreme as a router with a service of mpbs, but in the back of the house it does not go up to more than mbps. I tried a TP-Link extender but the connection was unstable and dropped a few times a day.
Apple told me there is a compatibility issue and recommended me to upgrade the router to a mesh system 2-pack or 3-pack. Orbi I need stable, steady fast internet in all areas of the house. Thanks a lot! Apple stuff is not good and extenders are even worse, Pablo. For that place, you might just need one router. Or you can go with the CT8. Also, note:. Your internet speed is actually barely fast enough for that many simultaneous streaming devices.
No router can make your Internet faster. Check out this post on QoS , that might help. Take your time and read this post, it will help. The Internet cable comes from the basement at the front of the house, and no chances to change that.
The modem and the router have to be at the front—I may be able to move the router to the other side of a half wall and leave the modem in the front. In terms of your two suggestions, the router is WiFi 6 dual-band and the mesh system is tri-band but not WiFi 6, right? Was that just based on my budget or technical needs? If cost is not an issue, would you recommend a tri-band WiFi6 mesh system then?
Yes, my suggestions were based on your budget, Pablo, and with the consideration of your current hardware. You can also consider the XT8 or one of those tri-band on this list. You hit a good point, apparently my place has problematic walls! From front to middle the performance reduces drastically, and from middle to back much worse.
Hi, sorry to bother again… I did more research and checked available products. If I understood correctly, tri-band vs dual may be more important that 6 vs 5… plus the configuration of QoS. Does a it make sense at all? I have a 2 story , sqft house. I would be running a wireless backhaul. Do you recommend the rbk 2 pack vs rbk 3 pack? Or maybe the Tp-Link AX I have 1gb service.
Thank you for your help. None of those. Check out this post , Andy. One more point to add. I have a couple devices that I want to hardwire, part of the reason I opted for mesh setup.
Is there a better option? I am still very confused over internet speed vs wireless speed. Most standalone routers or mesh routers market their product such as AC, dual band.
Essentially it is providing mbps on 5ghz band and mbps on 2. If i have a fiber broadband speed of mbps so even having just one active device connected to a 2. On paper, yes, in reality, not really, Jasmine, the 2. Check my reviews. Hi Dong. My question is about the triband vs dualband on the M9 and X How much will the dualband on the X60 affect it when the sattelites are going to connect wirelessly except for the router thats connected to the modem? Will i lose coverage or speed, or should it not be too bad compared to the triband?
Check out this post , Labib. Hi, Thank you for your informative article. It is also nice to see how you answer questions. I have a large year old brick home that I am trying to cover with fast reliable Wi-Fi. Including finished basement — 3 stories. Approximately sq ft. The challenge is thick mesh wire, plaster encased walls and ceilings. I bought a few years ago the Amplifi HD mesh system with 2 satellites with mb internet speeds from Comcast Xfinity, and I was relatively happy.
Definitely much better than DSL. With Covid and everyone trying to videoconference at the same time, add security cameras and Google Home devices, and we started having dramatic slowdowns. I increased our internet bandwidth to Gigabit speeds. However, I quickly realized that the Amilifi HD system was not maintaining the gigabit speeds, not on the 5ghz channel and of course not on the 2. And right next to the satellites it is also around mbs. However, almost any other room, devices switch to 2.
Multiple devices and we are back to our bottleneck problems. Bottom line, we have around 30 connected devices. After having read your article, I am trying to determine, will we get better signal strengths and speeds with the tri-band Orbi Pro 6 or will the dual-band Amplifi HD WiFi 5 — but rated to exceed gigabit speeds do the job with additional satellites distributed around the house?
Thanks in advance for your advice. If it has trouble with range on the 5GHz, other systems will, too. Unless you can run network cables , nothing can really improve your situation.
I came away thinking that because of physical barriers, gigabit speed internet, fairly heavy local WiFi traffic, and wireless mesh system that cannot be wired [We have existing cat 5 Ethernet, with speeds not exceeding mbs. Walls too thick to upgrade cabling, without major renovations at great expense. Especially one like the Tp-Link AX that has the ghz channel and seems to perform well, even far away. After reading your explanations and reviews, I finally bought 2 sets, 4 units, of the Deco x WiFi 6.
Huge old home, 3 floors, thick walls. I keep asking myself if I can get anything close to these speeds by buying another 3 or 4 mesh satellites for my older Amplifi HD mesh system? Many areas around 70 or so.
Too many users and we kept having slow downs and Zoom interruptions. Also satellites needed to be on 2. And only 2 dual channels. More on testing here.
More on Gigabit Internet here. What about something like a powerline backhaul? Powerline is just too slow or unreliable to deliver fast connection speeds. Good luck. Sorry, one more question. Will the 2. Will an aimesh be able te deliver the same download speed as an mesh system like the eero pro?
I am currently living in the past. My current setup is in the main part of the house which is an Apple AirPort Extreme, with a cat 6 running down to the basement and plugged into another Apple AirPort Extreme. We are a very heavy internet usage family, we stream everything, game, tablets, you name it we use it.
What are your thoughts? Thank you for your insights on this topic. I have lately seen that my video calls are dropping and suddenly my internet is out for a min. My dilemma is going for latest tech Wifi 6 vs. In a dual band of GHz i can have two clients which practiacally becomes GHz each while in tribands i can distribute the two bandwidth consuming clients into the two 5GHz channels.
So i could still end up getting GHz each. You need a router with a good QoS feature , Tapabrata. Currently using a nighthawk rv3 for wfh. I was just wondering if getting a tri-band will help make our wifi connections more stable? Not likely since zoom is Internet-related, David. What you need is good QoS settings. Thanks for the great site!
Lots of great information here. Would there be a difference in performance between: 1 Dual-band router with 1 5GHz band, up to mbps 2 Tri-band router with 2 5GHz bands, each up to mbps.
Yes, Wayne. But it depends on what client you have, how many streams, and what channel bandwidth routers and clients use. But the dual-band is the one that can give you up to 4.
Thanks Dong. What would you suggest from a performance perspective and why? Now i rushed out and bought 2 x AC routers, and figured it would be fantastic even with just one. Since you have wired your home, you can go with the XD4. The setup you mentioned is not good since you mixed routers of two different standards, tiers, and bands. Great article. This might be a stupid question so I am sorry in advance. I am newly researching dual vs tri band systems. I have been looking at the Eero mesh unit 3 pack.
Would this help get service on my 2nd floor and help speed things up in general. My main router is on the 1st floor. Check out this post. Hi Dong! Just discovered your site while trying to understand a bit more about tri-band versus dual band routers.
You are a wonderfully coherent resource, BTW, and am continuing to look at other posts. We have used the R trouble free for some time. We have since added lots of devices in the house — several cameras, 3 TVs running streaming services only, doorbells, smart gadgets — and decided its time to upgrade the very old range extender I am relying on while working upstairs maybe one with ethernet ports. So my question is, do you know why the two 5GHZ bands on triband routers have different signal strength?
The first 5GHZ bands on each are on channel 60 and they have a much poorer signal strength than the second 5GHZ bands which are on channel I have tried all combinations of channel widths but it seems to make no difference.
I have also used a wifi analyser to check that there is no channel interference from other wifi networks. In fact the first 5GHZ signal strength is so poor in most of the house it make me wonder if its even worth having a triband router at all and whether so save some money and just get a dual band one….
There are many of factors involved, David, and that varies from one location to another. Wi-Fi speeds always fluctuate a great deal compared to network cables. More on that in this post and better yet, this one. Hi Dong, My situation is this.
At our lake house we have a TV on the dock running Roku. We have a satellite wifi system from a local provider. Dock Tv freezes up. Which MESH system would you recommend? I was looking at the Linkeys tribute band that covers square feet, but my router is a NetGear dual band. Thanks in advance! Saw your question on FB, too, Myra.
The distance between the TV and the router not your house that matters. You just need to move the router close to the TV. Any mesh system will be better than what you have right now. Hi Dong, I used to ask you questions on cnet long ago. Or could that even be a quad-band router since it will have two 5GHz bands and two 2.
Note, the 2 5GHz bands will use separate SSIDs and wi-fi traffic will be routed to each to balance wi-fi connections and speeds or to have faster clients access one and legacy wi-fi clients access the other.
Choose a security mode from the "Security Options" section and then type a password into the "Passphrase" field. Type "Apply" to save and apply the new settings. The two networks will appear shortly on your Wi-Fi enabled devices. You can connect to any network using the correct password. Nick Peers has been writing technology-related articles since He holds a Masters in information technology degree from the University of East London.
Regardless of how old we are, we never stop learning. Classroom is the educational resource for people of all ages. They can now access WiFi 2. As the number of WiFi enabled phones grows, stress on 2. Still another issue with 2. It has a clear signal and more channels that can be combined for higher speeds. Currently 5. Each channel has 20MHz of bandwidth which allows for much better speeds compared to 2. Limitations of 2. The interference can negatively impact users, routers and access points To add to the overcrowding of 2.
Products Per Page: 8 12 16 20 40
0コメント